How to Improve Ventilation in Manufacturing Facilities

How to Improve Ventilation in Manufacturing Facilities

Ventilation is the process of bringing fresh air from outside into an enclosed area. Everywhere where people spend more time indoors—including residential, commercial, and industrial areas—is where it is required. Ventilation in manufacturing facilities is as equally important.

In a contained environment, the air quality deteriorates over time. The amount of oxygen required to sustain human life decreases if a room is occupied and entered slowly. Carbon dioxide and other airborne contaminants contaminate it. The environment becomes cleaner and the indoor air quality becomes better when fresh air is introduced. In a closed space, fresh air also helps control humidity and temperature.

Machines in industrial settings, such as manufacturing plants, produce additional heat. These devices’ heat and dust pollute the air and raise the temperature inside the building. Continued exposure to poor air quality can cause health concerns such as headaches, nausea, dizziness, asthma, respiratory problems, and even ENT disorders.

The air quality in the unit must be monitored by the plant manager or maintenance manager. To keep clean air on the property, this can be accomplished by hiring air quality services. The management should routinely check the indoor air quality in the industrial units using air quality services.


Tips on Improving Ventilation in Manufacturing Facilities

A heat protection strategy alone is insufficient. To maintain optimum ventilation in manufacturing facilities to bring in the fresh air, facilities management must also monitor the air quality in production facilities.

Here are some suggestions for enhancing ventilation in manufacturing facilities.

1. Turn Off the Heat Source When Not Needed

When a machine is used for an extended period, it warms up. Not only does this increase the temperature within the building, but it also heats the machine’s internal coils. The devices must be turned off to give them time to cool down. By turning off the lights, you can also make sure that the warm air in the manufacturing building dissipates and that it gets cooler there.

2. Remove Hot Air from the Space

The simplest approach to let warm air out during work hours is to keep windows open. In general, warm air rises to the top. So that warm air can escape and be replaced by cooler air, companies can add windows or ventilation shafts near the top.

Turbine fans or exhaust fans can be used to maintain air quality control, depending on the size of the plant and the kind of machines involved. The fans aid in forcing hot air outside of the building and allowing cool air within. Use flameproof fans to ensure that smoke and heat are sucked out if your operations are risky and prone to fire.

Factory interior temperatures can be effectively lowered by using desert coolers. Where there is little humidity and dry air, these coolers perform best. Additionally, you can also use chillers, air conditioners, air purifiers, air filters, and much other equipment.

3. Protect the Facility from Excess Heat

The health of the personnel who are engaged in the production facility may suffer as a result of excessive heat. Additionally, it lessens the machines’ resilience and can render them outdated.

Insulation is typically done to heat a space because of the low weather. But it’s important to insulate the building and the machinery against heat in production operations. Spray insulation can be used to accomplish this. The sprays function as a cooling agent for the hot surface and a barrier against heated air leaking into the plant. Use reflecting glass on windows and other exposed surfaces as well to keep heat from entering the building.

4. Paint the Walls and Roofs with Lighter Hues

The management of your manufacturing facility must keep the interiors cool and the employees healthy if it is situated in a hot climate.

Contrary to lighter hues like white, which reflect heat without allowing it to penetrate the surface, darker hues like black absorb light and heat. Make sure the building’s exterior walls and roof are painted white. This prevents heat from the outside from entering and warming the building.



One of the most important components of safety that factory managers must monitor is indoor air quality. The best approach to preserve interior air quality is adequate ventilation in manufacturing facilities.

Although facility management may have had policies in place to protect the health of their staff, they should have them reviewed by an organization that monitors the quality of the air.

Ventilation in manufacturing facilities not only protects the health of the workforce but also keeps equipment from overheating and becoming inoperable. To prevent this from happening, get in touch with the experts in providing better indoor air quality.

Leave a Comment

Your email address will not be published. Required fields are marked *